How to: Hyaluronic Acid gel

A while ago I posted how to make Aloe Vera gel.
I was planning to post a recipe of an hydrating gel (I have been using it in the morning for the last two months and I love it), but before I start, I thought it would be more important to show you how to make the basic ingredients for this gel.
Of course Hyaluronic Acid gel is one of these ingredients!

So tadaaa 😀

Hyaluronic Acid Gel

I love hyaluronic acid for the property of keeping the skin hydrated, also it is a substance that is naturally found in our skin.
It is used in many anti-aging creams (I don’t believe it is miraculous and it will make wrinkles disappear, but simply because it helps keeping the skin hydrated, the skin appears more plump and fresh).

Recipe:
[WARNING: this recipe, like ALL the recipes in my blog, is of COSMETIC GRADE, therefore this gel cannot be used any differently than by applying it ON your skin]
1 gr         Sodium Hyaluronate 
98,4 gr  Distilled Water (or Rose water 😉 read the end of the post)
0.6 gr    Cosgard (or any other preservative of your choice: of course if you change preservative, use the amount of preservative which is needed for that specific kind of preservative)

1) Measure the Sodium Hyaluronate

2) Measure the water

3) Pour the Sodium Hyaluronate on top of the water

At this point some people like to mix it and some people like to let it be.
I have actually tried both ways and here is my experience: if you try to mix it at this stage, part of the SH will stick to the spoon. This means that a precious part of your gel will get lost (and SH is not exactly cheap, so you’d want to mind this).
IMO it is better to let the SH hydrate by itself on top of the water for a while, and stir later.

4) Cover the glass with plastic film and let it rest in the fridge for few hours.

5) After few hours the SH will be hydrated. Now you can stir it with a spoon so to make the gel more smooth (there will be harder parts and softer parts).

6) Add your preservative, stir again and put in a bottle 🙂

You can use this Gel by itself, for its great hydrating properties!
If you have a very dry skin you could like to use it before applying your cream 🙂
You could also make a more luxurious gel by substituting part of the water (or the entire water) with Rose water!

As you might have noticed in the market we can find creams or serums that say “40% Hyaluronic Acid”.
Well, as you can see I am using 1% of Sodium Hyaluronate and this is the highest concentration I can use.
It is technically impossible to use 40% of SH inside of a gel: it will never hydrate and you will waste a huge amount of money.
I tried once to make a 2% and it took ages to hydrate. In the end it was too thick. I could still use it but it was not a good gel at all.
I don’t know what they could mean by saying “40% Hyaluronic Acid” on a product where there cannot be more than 2% of SH, but it is long time I stopped believing what I read in the commercials for creams. The only thing I can believe now is the INCI and what I KNOW is that in one cream where it was said “40%”, the Sodium Hyaluronate in the INCI was at 6th place (this means that in NO WAY it could be at 40%, it could have been at maybe 1% or even less).

Hyaluronic Acid Gel 3 Hyaluronic Acid Gel 2

The only way to be sure of what’s inside a cream or serum or face-gel is MAKE IT YOURSELF!
Not only this is a great thing to learn, it also makes you feel like IT’S ALL IN YOUR HANDS!  😉

 

 

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

184 thoughts on “How to: Hyaluronic Acid gel”

  1. Just a comment for anyone who is vegan, or concerned with animal testing etc….SODIUM HYALURONATE is derived from animal sources. The following excerpt is fro, EWG Cosmetic Data Base….
    About SODIUM HYALURONATE: Sodium hyaluronate is the sodium salt of hyaluronic acid, a naturally occurring polysaccharide found in connective tissues such as cartilage. This ingredient is listed in the PETA’s Caring Consumer guide as derived from animal sources.
    http://www.ewg.org/skindeep/ingredient/706071/SODIUM_HYALURONATE/#.WaL4WciGPIU

    Like

    1. https://www.ncbi.nlm.nih.gov/pmc/articles/PMC3239841/

      “Traditionally HA was extracted from rooster combs, and now it is mainly produced via streptococcal fermentation. Recently the production of HA via recombinant systems has received increasing interest due to the avoidance of potential toxins.” So most likely it’s coming from one strain of bacteria or another. You would have to do your research regarding sources. Personally bacterial processes aren’t against my own herbivorean values but I wanted to share for the sake of information.

      Like

  2. Hi, I was wondering if I could replace part of water with aloe Vera gel and if yes then do I need to heat the water and gel first of I can follow the procedure you have mentioned.

    TIA

    Like

      1. I would like it to it much better for the skin as Aloe Vera has slot of benefits. Gel would be store bought. BTW today I made my first batch with just distilled water and applied very little on my face to try. No doubt my face felt very soft to touch but I got some kind of Allergy and my body started itching. I have just taken an anti allergic tab while am writing this. Don’t know the reason. Should I try making it with less than 1 % .

        Like

      2. I am sorry but it is not clear what you made: did you make water + hyaluronic acid?
        If you got an allergic reaction from water+hyaluronic acid… There are two options:
        1) what you bought is NOT hyaluronic acid
        2) you are allergic to hyaluronic acid: which is very difficult since it is something we already have inside our skin.
        So I am thinking that what you bought is not hyaluronic acid. Where did you purchase it?
        I don’t suggest you to use it less than 1%, if you got a bad reaction to whatever substance you used, you shouldn’t use it again!

        Like

  3. Thanks for the help. I just used distilled water and HA and added iscagard peg .5% . I think I will make a smaller batch first without the preservative . And also talk to my supplier from. Where I got my HA.

    Thanks for your help.

    Like

    1. Iscaguard peg, the company suggests to use it in the range between 0.4%-1%, why did you add it at 5%?
      It is not fresh water. Its solubility in water is 2.6%!
      Of course it was IRRITATING.
      Do a batch of water + HA + preservative at the correct percentage!

      Like

  4. OK, I made it again today with any preservative as I made just 10gms . So far no reactions … Am gonna try with preservatives over the weekend to see the results. Thanks for all the help.

    Like

  5. Hi! Thank you for these instructions, I have just placed an order for hyaluronic acid to try this myself. Do you think I can use rose hydrosol instead of rose water? I know they are not same but it’s what I have on hand. Thanks again for your great blog!

    Like

  6. HAAAAA ~ i just got the name of your blog. XD So what is this gel used for? is it for the face? hands? I’ve never used a gel in my life for hydration. :O

    Like

    1. Hi Lorraine, yes it can be added but I wouldn’t exceed the suggested % of use of the extract. Depending on what sort of extract it is (and which solvent was used to make it, essentially), there might be different suggested % 🙂

      Like

  7. HI, im from Asian. i want to make serum with HA and adding of Vit C and B3. can i use PEG as preservative? and what is the function of preservative actually. sorry a bit noob here.

    Like

    1. PEG-what? Preserving systems are used to not make the formula spoil. Bacterias and molds and fungi can really thrive in lotions unless we add a preserving system.
      PEGs are usually not preservatives, you need to use a proper broad spectrum preserving system. 🙂
      I don’t suggest adding vitamin C to HA serum, I explain why in the comments above, as many ask about this. I suggest making HA serum with B3 if you want, and separately making the other vitamin C serum on my blog 🙂

      Like

  8. Hi,
    I’m trying to formulate my own serum, can you help me to screen through the formula and see if these are good enough for me to try or should I take out any of these active ingredients or lower it..
    1) Distilled water 85%
    2) Niacinamide 4%
    3) Multive NAG Acetyl Glucosamine 2%
    4) Multive PAD Potassium Azeloyl Diglycinate 2%
    5) Aloe Vera Extract (liquid form) 2%
    6) D Pathenol 1%
    7) Glycerin 1%
    8) Sodium Hyaluronate Powder (molecular weight 1000 – 1800 kDa) 1%
    9) Sodium Hyaluronate Oligo HA Powder (Low Molecular Weight <10 kDa) 1%
    10) Germal Plus 0.5% (last I check with my supplier, can up to 0.8% but since I am using it for personal use and will finish it within 3 months and I am thinking of to stop at 0.5%)
    11) Fragance Oil 0.5%
    Please help… Thank you in advance
    Regards,
    Peng Yaw

    Like

Leave a Reply to It's all in my hands Cancel reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s